-40%
1/2 in. (0.710 o.d.) x 500 ft. poly drip irrigation tubing | watering system new

1/2 in. (0.710 o.d.) x 500 ft. poly drip irrigation tubing | watering system new

$ 27.45

Availability: 100 in stock
  • Installation Area: Garden (above ground)
  • Assembled Depth (in.): 22 in
  • Item Length: 2 in
  • Type: Drip Tubing/Drip Irrigation Line
  • Condition: New
  • Features: Adjustable Flow Rate
  • Color: Black
  • Compatible Brand: For Gardena
  • Item Diameter: 0.5 in
  • Maximum Flow Rate: 2 GPM
  • Suitable For: Planted Areas
  • Control Style: Analog/Mechanical
  • Compatible Model: For Gardena Classic Cleaning Nozzle
  • Item Height: 2 in
  • Tubing Length (ft.): 500
  • Threaded Connection: Female 1/16 in
  • Assembled Height (in.): 12 in
  • Manufacturer Warranty: 3 Years
  • Inner Diameter (in.): .50
  • Assembled Width (in.): 22 in
  • Number in Pack: 1
  • Outer Diameter (in.): .50
  • Item Width: 2 in
  • Item Weight: 0.1 lb
  • MPN: TS500
  • Material: Polyamide
  • Brand: Rain Bird
  • Maximum Working Pressure: 10 psi
  • All returns accepted: ReturnsNotAccepted

    Description

    Description
    Made with premium quality polyethylene resins, DIGs 0.710 OD drip irrigation poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. The drip tubing, commonly referred to as poly tubing, blank tubing or drip hose, is used as the primary supply line of a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected to deliver water to the plant areas. DIGs drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life.
    Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
    Use with DIGs 0.710 compression fittings, color blue, and nut lock fittings
    Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
    Bending radius: 1 ft.
    DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
    Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground
    Maximum operating pressure: 60 psi
    Dimensions: 500 ft. with 0.620 ID x 0.710 OD
    Resistant to cracking, heat, UV rays and chemicals
    Can be installed above or below ground
    Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected